您的位置:首页>>新闻中心>>上海洁净室车间安装高藤牌快速门。

上海洁净室车间安装高藤牌快速门。

上海洁净室车间安装高藤牌快速门。

来源:|作者:gaotengmen|发布时间: 2019-07-27|次浏览

上海洁净室车间安装高藤牌快速门。 
Gaoteng Fast Door is installed in Shanghai Clean Room Workshop. 
上海洁净室车间安装高藤牌快速门。【高藤门业】定制报价:常经理,0513-88380079,13818597388.专业生产PVC快速门,工业提升门,冷库快速门,硬质快速门,快速堆积门,洁净室快速门的优质厂家。

上海洁净室车间安装高藤牌快速门。
Gaoteng Fast Door is installed in Shanghai Clean Room Workshop.

快速门厂家www.gaotengmen.com
快速卷帘门厂家www.gao-teng.com

Basic Standards for Installation of PVC Fast Rolling Curtain Doors
There are many installation standards for PVC fast curtain doors, which vary from manufacturer to manufacturer. Generally speaking, the basic standards for installing PVC fast rolling shutter doors are as follows:
1. Fast doors must be horizontal, horizontal and vertical, and must be on the horizontal line.
2. Installation and fixing of fast rolling shutter door should be firm and reliable, screw should be tightened in place, should not be tightened.
3. Fast shutter door control box, radar, motor and other components need to be carried out in accordance with the standards and specifications. If necessary, the PVC pipe must be inserted and the cable head should not be exposed.
4. The upper and lower parts of the guide rail must be fixed rather than fixed.
5. The range of radar adjustment should not be too close to avoid door failure. The installation position of safe infrared ray should be maintained on the horizontal line, and the horizontal line should not be inconsistent.
6. In the process of installing fast curtain door PVC fast curtain door, if we find that the fast curtain door has different sizes, the quality of the door is insufficient, and does not meet the site installation requirements, it is necessary to communicate with the relevant personnel in time, and communication can not be handled. The leadership of the company should be responded to immediately.


PVC
快速卷帘门安装的基本标准

PVC快速卷帘门有许多安装标准,安装标准因制造商而异。一般来说,安装PVC快速卷帘门的基本标准,具体内容如下:

1,快速门门保证水平,水平和垂直,必须在水平线上。

2。快速卷帘门的安装和固定应牢固可靠,螺钉应拧紧到位,不应有松紧。

3,快速卷帘门控制箱,雷达,电机等组件需要按标准规范进行。如有必要,必须插入PVC管,并且不应暴露电缆头。

4。导轨的上部和下部必须固定而不是固定。

5,雷达调节范围不要太近,以免造成门体故障。安全红外线的安装位置应保持在水平线上,不得出现水平线不一致。

6。在安装快速卷帘门PVC快速卷帘门的过程中,如果发现快速门有不同的尺寸,门的质量不够,不符合现场安装要求等,有必要及时与相关人员沟通,和沟通无法处理。应该立即回应公司的领导。


 

联系方式

您的需要就是我们努力的方向!

电话:021-37820097 021-37820079
手机:13818597388 13564378713
邮箱:gaotengmy@126.com
地址:上海市松江区港业路558号12幢

我要留言

姓名

手机

邮箱

地址

留言